Water Purification Accessories and Replacement Parts
Ace Glass, Inc. 24/40 arsenic test chimney tube, #5 O-ring joint
24/40 Arsenic limit test capillary chimney tube with a pulled tip below 24/40 joint at bottom, and a #5 o-ring joint at top with hooks for springs.
Hach Company General Boiler Water Test Kit, Model AL-94 MG-L, Drop Count Titration
Proper maintenance and economy of operation of modern boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. Used for controlling boiler and cooling water treatement and checking corrosion, this test kit is an economical solution for the small boiler operator who needs to monitor alkalinity (5-400 mg/L), chloride (5-400 mg/L), hardness (0-2,500 mg/L), iron (0-4 mg/L), and pH (4-10).
Hach Company Boiler Feed and Scale Test Kit, Model BSC-1, Drop Count Titration
Proper maintenance and economy of operation of modern boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. An economical test kit for monitoring scale formation in small industrial boilers, the BSC-1 Boiler Feed and Scale Test Kit uses drop count titration methods to determine levels of alkalinity, chloride, and hardness.
Cole-Parmer Stuart WR20 Reservoir Assembly for Aquatron Water Stills; 20 L
Improve your operations with these accessories specifically designed for the Stuart Aquatron Water Stills.
Uline Tank Assembly For Better Pack
Tank Assembly For Better Pack Electronic 555es Series Tape Dispensers
Grainger Single Shank Ball SS 1/4 in Rope dia.
The Grainger 16X630 is a 16-inch diameter, 630 CFM, 3-speed wall mount exhaust fan. It features galvanized steel housing construction and is designed for general ventilation use. This exhaust fan has a built-in backdraft damper and operates at 50/60 Hz. It requires a 115V power source and measures approximately 16 x 16 x 12 inches. The 16X630 can help remove stale or humid air from a variety of residential, commercial and industrial spaces. With its powerful air flow capacity, this wall-mounted exhaust fan is well-suited for workshops, laundry rooms, bathrooms and more.
LICOR Xcell and Surelock Tank Adaptor (2 adaptors)
Use these adapters to run Odyssey Mini Gels in Invitrogen XCell SureLock and other compatible electrophoresis tanks.These adaptors are not required for Bio-Rad Mini-PROTEAN systems. Invitrogen and XCell SureLock are trademarks or registered trademark of Thermo Fisher Scientific, Inc. in the US and other countries. Mini-PROTEAN is a trademark or registered trademark of Bio-Rad Laboratories, Inc. in the US and other countries.
Foxx Life Sciences EZBio MTO Centrifuge Tube Assembly, 15mL, Polypropylene (PP) Centrifuge Tube, Sampling Tube, Single Use Technology with Pureweld Tubing and Pinchpipe, Vented with Diptube, CPC Aseptiquik (AQS), Sterile, 10/CS
The sterile EZBio Centrifuge Tube Assembly is a single use closed loop system designed for aseptic sampling and sterile transfer.
All components are USP Class VI resin, assembled in a Class 7 cleanroom, and gamma-irradiated in the USA. These assemblies feature a closed cap, an 18” inlet line (1/8” x 1/4” TPE tubing) with a pinch clamp, pinch pipe, plug or luer or CPC MPC/AQS, a 1.5” vent line with PTFE hydrophobic filter, and a dip tube. A centrifuge tube stand securely holds either size. The polypropylene resin meets FDA and USP standards.
Features
Designed for contamination-free sampling/transfer within closed systems
Leak-proof seal with a platinum-cured silicone gasket
Available in 15mL and 50mL with six TPE tubing options and four fitting types.
Withstands up to 4 psi; pinch pipe enables quick aseptic separation
Applications
Cell Harvest & Downstream Processing
Drug Substance Purification
Drug Product Formulation
Buffer & Media Preparation
Foxx Life Sciences EZBio MTO Centrifuge Tube Assembly, 50mL, Polypropylene (PP) Centrifuge Tube, Sampling Tube, Single Use Technology with Pureweld Tubing and Pinchpipe, Vented with Diptube, Plug, Sterile, 10/CS
The sterile EZBio Centrifuge Tube Assembly is a single use closed loop system designed for aseptic sampling and sterile transfer.
All components are USP Class VI resin, assembled in a Class 7 cleanroom, and gamma-irradiated in the USA. These assemblies feature a closed cap, an 18” inlet line (1/8” x 1/4” TPE tubing) with a pinch clamp, pinch pipe, plug or luer or CPC MPC/AQS, a 1.5” vent line with PTFE hydrophobic filter, and a dip tube. A centrifuge tube stand securely holds either size. The polypropylene resin meets FDA and USP standards.
Features
Designed for contamination-free sampling/transfer within closed systems
Leak-proof seal with a platinum-cured silicone gasket
Available in 15mL and 50mL with six TPE tubing options and four fitting types.
Withstands up to 4 psi; pinch pipe enables quick aseptic separation
Applications
Cell Harvest & Downstream Processing
Drug Substance Purification
Drug Product Formulation
Buffer & Media Preparation